EkiControl TwinCut 30 – 40 Multiblanking cutting lines

EkiControl TwinCut 30 – 40 Multiblanking cutting lines

It´s here, 1500×3 mm and 1500×4 mm

One more step, a compact line for 3 and 4 mm thick with simultaneous multiblanking cutting.

A machine with a tilting straightener is elaborated to offer the maximum quality of sheet straightening. The inside 13 rolls, of which 2 are at the entrance and 2 overlapped are at the exit, carry out the traction of a sheet. The 9 straightening rolls, of which 4 are upper and 5 are lower, make a sheet flat. Each straightening roll is accompanied by back-up rolls that avoid bending the straightening roll.

The tilting of the upper part of the straightener is motorized with reducers and a spindle to carry out the straightening.

A quickly adjustable slitter is located on the same structure of the straightener. A side module is movable to allow extracting blade holders and thus facilitates the configuration.

Cut-to-length shears are manufactured either with a reducer or a pneumatic clutch depending on the thickness to be cut. The machine is designed specifically for this cutting line.

A mobile desk helps an operator have the ease of movement and continuous visualization.

Technica specificatios

TwinCut 30
Coil capacitu: 10 / 15 / 20 Ton
Sheet thickness: 0,6 t/m 3,0 mm
Production speed: tot 30 m/min

TwinCut 40
Coil capacity: 10 / 15 / 20 Ton
Sheet thickness: 0,6 t/m 3,0 mm
Production speed: tot 40 m/min

Additional Technical specifications TwinCut 20 DM**
Working widht: 1000 mm
Material: Steel, Stainless Steel en Aluminum
Slitting rolls: 3, 4 of 6
Accurency: ± 0,5 mm
Straightening rolls: 5 / 4

Options
Motorized hydraulic pressure arm
Paper rewinder
Film plastic device
Specific electronic equipment
Stackers, packers
Scrap rewinders (cleaning or sanitation)
Motorized entry guide adjustment