Electr. bending machines

About JÖRG Contact/info Route Jobs

Make your choice:

All bendingmachines:

Electr. bending machines

Manual bending machines

Luna MBR (8266)

A modern motor powered assymetric bending roller.

Luna MBR platenwals

Luna MBL (4135)

Een eenvoudige elektrische wals met asymmetrische rolopstelling. Met deze machine kan recht en conisch worden gewalst. Volledig rondwalsen kan men door het zogenaamde aanbekken. Standaard wordt de machine geleverd met dubbel voetpedaal, remmotor, noodstop en trapdraad. Voorzien van 4 draadinleggroeven. Optioneel kunnen de rollen worden gehard

luna 4135

More images...

Aanbekken met asymmetrische wals

Luna MBT (8264)

Schwartmanns Roller bender WSRM 35.04

The bending machine is strong build and is maintenance free. A good machine for small parts, diameter round 40mm. The rolls are a-symmetric mount with maintenance free bearings. Drive: three rolls, with a powerful pole switch brake motor with two speeds. The upper roll with one hand move to open. Under roll with 3 wire groove, by means of excenter the thickness of plate is adjustable. Back roll with 3 wire groove and excenter parts for conical bending. With a handle can adjust the back roll.

Schwartmanns WSRM 35.04
Capacity: 420x1mm by 400N/mm2
Weight: 70kg
Roll diameter upper roll: round 35mm
Roll diameter under roll: round 55mm
Power: 0,3/0,45kW
Work speed: 4/8 m/min

Standard:
- A- symmetric roll mount
- Stand
- Wire groove
- Conical bending
- Various adjustable back roll by means of handle
- Three roll drive
- Pole switch brake motor with two speeds

Option:
- Rolls hardened, covered with synthetic, hardened or polish 1000N/mm2
- Finger protection

Schwartmanns (WSRN 35.04) Roller bender

Schwartmanns Bending machine WSRM 02.1

The bending machine is strong build and is maintenance free. The rolls are a-symmetric mount with maintenance free bearings. Drive: three rolls, with a powerful pole switch brake motor with two speeds. The upper roll with one hand move to open.
Under roll with 3 wire groove, by means of excenter the thickness of plate is adjustable.
Back roll with 3 wire groove and excenter parts for conical bending.
With a handle can adjust the back roll.

Schwartmanns WSRM 02.1
Capacity: 1020x1mm by 400N/mm2
Weight: 107kg
Roll diameter: round 50mm
Power: 0,3/0,45kW
Work speed: 5/10 m/min

Standard:
- A-symmetric roll mount
- Stand
- Wire groove
- Conical bending
- Various adjustable back roll with handle
- 3 roll drive
- Pole switch brake motor with two speeds.

Option:
- Rolls hardened, covered with synthetic, polish or hardened 1000N/mm2
- Finger protection

Platenwals Schartmanns WSRM 02.1

Schwartmanns Roller bender WSRM 03/04

The bending machine is strong build and is maintenance free. The rolls are a-symmetric mount with maintenance free bearings. Drive: three rolls, with a powerful pole switch brake motor with two speeds. The upper roll with one hand move to open. Under roll with 3 wire groove, by means of excenter the thickness of plate is adjustable. Back roll with 3 wire groove and excenter parts for conical bending. With a tooth arc can adjust the back roll.

Schwartmanns
WSRM 03.1: 1020x1,25mm by 400N/mm2; 175kg
WSRM 03.2: 1270x1mm by 400N/mm2; 215kg
Roll diameters: round 55mm
Power: 0,75/1,1kW
Work speed: 6/12 m/min

WSRM 04.1: 1020x1,5mm by 400N/mm2; 180kg
WSRM 04.2: 1270x1,25mm by 400N/mm2; 230kg
WSRM 04.3: 1520x1mm by 400N/mm2; 280kg
Roll diameters: round 65 mm
Power: 0,75/1,1kW
Work speed: 6/12 m/min

Standard:
- A symmetric roll mount
- Stand
- Wire groove
- Conical bending
- Adjustment back roll by means of tooth arc
- 3 roll drive
- Pole switch brake motor with two speeds.

Option:
- Various adjustable back roll with handle
- Finger protection
- Tranport support
- Rolls hardened, covered with synthetic, hardened or polish 1000N/mm2
- Other drive speed

Schwartmanns WALS WSRM 03/04

Schwartmanns Bending machine WSRM 05/06/07

The bending machine is strong build and is maintenance free. The rolls are a-symmetric mount with maintenance free bearings. Drive: two rolls, with a powerful pole switch brake motor with two speeds. The upper roll with one hand move to open. Under roll with 4 wire groove, by means of excenter the thickness of plate is adjustable. Back roll with 4 wire groove and excenter parts for conical bending. With a handle can adjust the back roll.

SCHWARTMANNS
WSRM 05.1: 1020x2mm by 400N/mm2; 340kg
WSRM 05.2: 1270x1,75mm by 400N/mm2; 380kg
WSRM 05.3: 1520x1,5mm by 400N/mm2; 420kg
WSRM 05.4: 2020x0,75mm bij 400N/mm2: 470kg
Roll diameters: round 75 mm
Power: 1,0/1,4kW
Work speed: 4/8 m/min

WSRM 06.1: 1020x2.25mm by 400N/mm2; 355kg
WSRM 06.2: 1270x2mm by 400N/mm2; 400kg
WSRM 06.3: 1520x1,75mm by 400N/mm2: 445kg
WSRM 06.4: 2020x1mm by 400N/mm2: 490kg
Roll diameters: round 80 mm
Power: 1,0/1,4kW
Work speed: 4/8 m/min

WSRM 07.1: 1020x2,5mm by 400N/mm2; 380kg
WSRM 07.2: 1270x2,25mm by 400N/mm2; 430kg
WSRM 07.3: 1520x2mm by 400N/mm2; 480kg
WSRM 07.4: 2020x1,25mm by 400N/mm2; 530kg
Roll diameters: round 85 mm
Power: 1,0/1,4kW
Work speed: 4/8 m/min

Standard:
- A- symmetric roll mount
- Stand
- Wire groove
- Conical bending
- Various adjustable back roll with handle
- Two roll drive
- Pole switch brake motor with two speeds.

Option:
- 3 roll drive
- Finger protection
- Transport support
- Rolls hardened, covered with synthetic, hardened or polish 1000N/mm2
- Other speeds

Bending roller 05/06/07

JÖRG Machines B.V.
Edisonring 10
6669 NB Dodewaard
Nederland
T.:  +31 (0) 488-482087
F.:  +31 (0) 488-482619
I.:    www.jorg.com
E.:  info@jorg.com